L
O
A
D
I
N
G
Mishimotoرقم القطعةMMRAD-HE-05نظام التبريد / الرديترات
اختر سيارتك ونتأكد إنها تركبالجمارك والضريبة داخل السعر
نفدت الكمية حالياً
ما فيه موعد مؤكد لرجوعها حالياً.
نرسل لك رسالة واتساب أول ما ترجع
Air-to-Water Heat Exchanger, Dual Pass, 24in x 7.6 in x 1.9 in Core, 750HP
An air-to-water charge-air cooling system moves intake heat into a coolant loop, and the heat exchanger is where that heat finally leaves the car. Size it too small and the loop has nowhere to dump the load. Coolant temperature climbs, the charge-air cooler stops pulling heat out of the intake tract, and intake temperatures rise with it.
The Mishimoto Universal Air-to-Water Heat Exchanger gives that loop the capacity to keep up. Its 24.0in x 7.6in x 1.9in core supports charge-air cooling systems on builds making up to 750 horsepower.----The 24.0in x 7.6in face puts 182 square inches of heat-rejection surface in the airstream, while a dual-pass core routes coolant across it twice.
That layout lets a 1.9-in thick exchanger do the cooling work of a deeper unit, which matters when the only clearance left in the chassis is shallow. Bead-rolled 7/8-in inlet and outlet ports lock standard coolant hose in place for a leak-free connection. An integrated bleeder purges air pockets during the fill, so the loop cools at full capacity from the first drive.
Aluminum core and end tank construction handles the pressure and heat cycling that fatigues plastic tanks. Universal mounting bosses on each end tank provide load-bearing attachment points on both ends.----Universal fitment. Mounting hardware locations and 7/8-in hose connections suit custom, swap, and forced-induction builds up to 750 hp.
Backed by the Mishimoto Lifetime Warranty.
Cools charge-air systems up to 750 hp - enough capacity to carry the heat load of an air-to-water intercooler loop on builds making up to 750 horsepower. The exchanger is not what caps the setup.
182 square inches of frontal area - the 24.0in x 7.6in x 1.9in core puts a large heat-rejection surface in the airstream. Coolant temperature drops before it reaches the charge-air cooler.
Mounts anywhere the build has room - universal mounting bosses on each end tank give you load-bearing attachment points on both ends, instead of fabricated straps or hose-tension mounting.
Bead-rolled 7/8-in inlet and outlet - the rolled bead gives a hose clamp a positive shoulder to seat against, locking standard 7/8-in coolant hose in place for a leak-free connection.
Integrated bleeder clears trapped air - a built-in bleeder purges air pockets during the fill, so the loop reaches full cooling capacity instead of losing performance to trapped air.
All-aluminum construction, no plastic to crack - aluminum core and end tanks take the pressure and heat cycling of a working intercooler loop, where plastic tanks fatigue and split.